When your line stops, everything stops. We build control systems that don't.

Reliable automation is the backbone of every modern plant. We design, program and commission complete control systems — from a single machine retrofit to plant-wide SCADA covering hundreds of I/O points.

Book a site assessment See delivered systems

What we deliver

Complete control systems, engineered and accountable.

Our engineers have delivered automation for water treatment plants, airports, food manufacturers and municipal facilities across Malaysia.

How an automation system connects: sensors and motors wire into a PLC, operators use the HMI, SCADA supervises the plant, and teams monitor remotely

PLC programming — new installations across Schneider, Siemens, Rockwell, ABB and Unitronics platforms.
HMI development — operator interfaces designed for clarity, alarm management and faster response.
SCADA systems — plant-wide supervisory control with historian, trending, reporting and remote access (Citect, InduSoft, FactoryTalk, WinCC).
Control panel design & fabrication — built, wired and tested to site specifications.
Telemetry & remote monitoring — RTU and wireless for distributed assets like pump stations and reservoirs.
Commissioning, training & support — we stay until your operators are confident, then back you with maintenance contracts.

Platform expertise

Schneider Electric Alliance Registered Partner. Fluent across every major platform.

Schneider ElectricAlliance Registered PartnerPartner ID SEAP4585MY

Alliance Registered Partner

Registered in Schneider Electric’s Alliance Partner Program for system integrators — direct access to Schneider technical support, partner training and genuine licensing. Modicon PLCs, EcoStruxure SCADA, Schneider drives and power equipment: you're working with a recognised partner, not a reseller.

Deep experience

Siemens PLC & SCADA

The majority of Malaysian plants run Siemens — and so do many of our delivered projects. We supply genuine hardware and licenses and develop in-house: SIMATIC S7-1200/1500, TIA Portal and WinCC. From new lines to S5/S7-300 migrations, our engineers speak fluent Siemens.

Multi-brand

Rockwell, ABB & Unitronics

We program and commission Allen-Bradley/FactoryTalk environments, ABB control systems and Unitronics all-in-one PLC+HMI platforms — so multi-brand plants get one integrator instead of three.

Our process

Six stages. One accountable team.

Site study

Process, constraints, I/O scope.

Functional design spec

Architecture and sign-off.

Programming & FAT

Factory acceptance testing.

Installation & SAT

Site acceptance, planned windows.

Training

Operators confident before we leave.

Support

Maintenance contracts.

We delivered the SCADA system for a district water treatment plant in Sarawak and the Distributed Control System at a major international airport — systems where failure is not an option.

Read the case studies

Frequently asked

What's the difference between PLC, SCADA and DCS?

A PLC is the controller that runs your machine logic; SCADA is the supervisory layer that visualises, alarms, trends and reports across many controllers; a DCS is a tightly-integrated control-and-supervision system typically used for large continuous processes. We design and integrate all three.

You're a Schneider partner — can you still work on our Siemens plant?

Yes. Most of our projects are multi-brand. A large share of our delivered work runs on Siemens (S7-1200/1500, TIA Portal, WinCC), which we supply, license and program in-house — alongside Schneider, Rockwell, ABB and Unitronics.

Do you provide ongoing maintenance contracts?

Yes. After commissioning we back your system with maintenance and support agreements — including remote diagnostics, scheduled checks and priority response for critical infrastructure.